TRF421X Damper Stay Upgrade for Shock Angle Tuning - 3451585 Tamiya  [3451585]

Price:
AUD$0.00
Brand:
Tamiya
Model:
3451585
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

How the stay mount alters handling on TRF421X

The damper stay identified as Tamiya 3451585 and associated with part code 42391 for the TRF421X is an RC replacement/hop-up item that defines where shocks mount on the chassis. It forms the interface between shock towers and the damper hardware and is designed for TRF421X-compatible mounting arrangements.

Functionally, this stay controls mounting geometry which changes shock angle, leverage and roll response — all factors that influence handling. When installing, preserve the chassis' original mounting points and hardware so alignment remains consistent; the part is meant to match TRF421X geometry rather than modify it.

Before fitting, verify part number 42391 against your chassis documentation, inspect holes and fasteners for fit, and follow standard RC maintenance checks on threads and torque values suited to your model.

How does 3451585 change shock geometry on the TRF421X?

By fixing the shock mounting position, the stay alters the shock angle and leverage ratio, which in turn affects roll stiffness and response during cornering. Small changes can produce noticeable handling shifts.

Can adjusting the stay improve understeer or oversteer?

Yes. Changing shock inclination via the stay affects roll centre and weight transfer. Use measured adjustments to move balance toward less understeer or to tame oversteer depending on your setup goals.

Do shock length or mount position limits apply?

Keep shock length and mount positioning within the chassis' designed range. The stay is intended to match TRF421X mounting points, so confirm compatibility before changing shock dimensions.

Should I re-check setup after fitting the new stay?

Absolutely. After installation, remeasure ride height, camber and toe, then test progressively. Adjust damping, spring rate or shock position as required to restore or improve handling balance.

Where to confirm part compatibility for tuning work?

Verify part numbers 3451585 / 42391 against TRF421X documentation and consult official Tamiya sources or authorised dealers to ensure the stay matches your chassis before making tuning changes.

Copyright © 2008-2026 rcjaz.com.au All rights reserved