TRX4 Compatible 23mm Aluminium Hex Adapters - TRX4010/23MM by GPM  [TRX4010/23MM]

Track-widening hex adapters for TRX4

These 23mm aluminium hex adapters are produced for TRAXXAS TRX4 Trail Crawler rigs and are supplied by GPM (TRX4010/23MM). They relocate the wheel mounting point to expand the track and bring the wheel closer to the chassis side for improved stance.

The adapters sit between the wheel hex and the hub or driveshaft end, preserving front CVD and rear driveshaft connection while widening lateral track. The 23mm increase (around 18mm thicker than the original hex reference) adjusts offset to help stabilise the model during technical, slow-speed runs.

Fitting is plug-and-play: pull the wheel hex, place the adapter onto the hub or CVD stub, then reinstall the wheel and fasten. Manufactured in aluminium for a balance of stiffness and manageable mass, these adapters are offered in multiple colours for visual matching or quick service identification. Intended for RC models only.

Included hardware from the product source: Stainless steel screw shaft M4*2.5*11.8 - 4 pcs, 5mm shims - 4 pcs, 5mm metal washers - 4 pcs, stainless steel hex socket screw 19mm - 4 pcs.