TRX-4 Off-Road Aluminium C-Hub & Knuckle Upgrade TRX4H100F by GPM  [TRX4H100F]

This front-end upgrade is intended for TRAXXAS TRX-4 Trail Crawler models and is supplied under part number TRX4H100F. The set bundles aluminium C-hubs, inner and outer knuckles, spindles, front CVDs and a steering link so you can alter steering geometry and shock positions for tougher off-road use.

Key mechanical notes: the C-hubs are manufactured from high-tensile aluminium and fitted with Delrin collars in the locating holes to reduce metal-on-metal wear where tie rods and shock mounts pass. The lower face of the C-hub is reduced to give extra ground clearance. Knuckle pieces adjust internal gear pitch and diameter and lower the axle centre to lift body clearance, and the kit enables shifting shock mounts so dampers cant slightly outward to help lateral stability when adjusting ride height.

The kit offers adjustment points as shown in the parts list: tie rods and shock ball ends can be fitted in alternate holes to change steering toe and shock angle, and the package includes the necessary screws and collars to assemble the front C-hub, knuckles and spindle/CVD assemblies as supplied.

For radio control use only, this product is intended to replace or upgrade the front c-hubs, knuckle arms, spindles and steering link areas on compatible TRX-4 scale crawlers.

Original Name / Part No:

8232+8252+8246+8255A+8258+8257+8228+8229

Compatible Models

• all TRX-4 models