TRX-4 Service Bevel & Pinion 35T/10T TRX41035T by GPM  [TRX41035T]

TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T
Price:
AUD$31.34
Brand:
GPM
Model:
TRX41035T
GTIN:
4894538380361
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T" title="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 35T & Pinion Gear 10T - GPM TRX41035T"

Product details

The TRX41035T gear set is an aftermarket service item comprising a 35-tooth bevel differential gear paired with a 10-tooth pinion, manufactured from 40CR steel for TRX-4 type transmissions. It installs into the inner front or rear gearbox to pass drive from the transmission into the axle differential.

Designed to match the listed TRX-4 variants, this component restores drivetrain engagement rather than altering motor or overall gear ratio. Standard gearbox teardown and careful mesh and bearing checks are required for a correct fit and quiet running.

Packing includes

  • Diff bevel gear - 1pcs
  • Pinion gear - 1pcs

Original Name / Part No:

8279?8279R

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 DEFENDER TRAIL CRAWLER -82056-4
  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 FORD BRONCO TRAIL CRAWLER-82046-4
  • TRAXXAS-1/10 4WD ELECTRIC TRX-4 BLAZER -82076-4
  • TRAXXAS-1/10 AND TRX-4 1972 CHEVROLET K5 BLAZER TRAIL CRAWLER-92086-4
  • TRAXXAS-1/10 AND TRX-4 CHEVROLET K10 TRAIL CRAWLER-92056-4
  • TRAXXAS-1/10 AND TRX-4 CRAWLER EQUIPPED WITH TRAXX-82034-4
  • TRAXXAS-1/10 AND TRX-4 FORD BRONCO TRAIL CRAWLER-92076-4
  • TRAXXAS-1/10 AND TRX-4 FORD F-150 RANGER XLT TRAIL CRAWLER-92046-4
  • TRAXXAS-1/10 AND TRX-4 LAND ROVER DEFENDER TRAIL CRAWLER-82056-4
  • TRAXXAS-1/10 4X4 TRX-4 SPORT HIGH TRAIL EDITION-82044-4
  • TRAXXAS-1/10 TRX-4 SPORT UNASSEMBLED KIT-82010-4
  • TRAXXAS-1/10 TRX-4 SPORT-82024-4
  • TRAXXAS-1/10 TRX-4 UNASSEMBLED KIT-82016-4
  • TRAXXAS-1/10 TRX-6 MERCEDES-BENZ G 63 AMG 6X6-88096-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-84

Fit the TRX41035T as a direct internal replacement in compatible TRX-4 gearboxes; always verify compatibility, set proper mesh and inspect bearings during rebuild to achieve reliable drivetrain function.

What tooth counts are included?

The kit includes a 35-tooth bevel differential gear and a 10-tooth mating pinion as a matched pair for correct mesh and ratio retention.

Is any modification needed to fit?

No machining is required for compatible TRX-4 models; fitment uses the stock gearbox cavity but you should check carrier height and backlash during installation.

How should I break in the gears?

Run the vehicle gently for the first few minutes after assembly, keeping RPMs low and checking for any abnormal noise while the grease beds into the gear faces.

Do these gears change drivetrain noise?

When mesh and bearings are set correctly, noise should be comparable to original parts; improper mesh is the primary cause of increased gear noise.

Copyright © 2008-2026 rcjaz.com.au All rights reserved