TRX6 Mercedes-Benz Aftermarket Aluminium Servo-Forward Front Bumper with D-rings TRX6330F by GPM  [TRX6330F]

TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F
Price:
AUD$48.52
Brand:
GPM
Model:
TRX6330F
GTIN:
4894538338393
Condition:
Brand New
Write a review
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"
alt="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F" title="TRAXXAS TRX6 MERCEDES-BENZ Aluminium Servo Forward Front Bumper +D-rings - 15pc set - GPM TRX6330F"

Aftermarket servo-forward front bumper for TRX6

This aluminium front bumper set is an aftermarket accessory for TRX6 Mercedes-Benz rigs, engineered to relocate the servo forward and alter front weight distribution for steadier slow-speed crawling and improved steering feedback. D-rings and the matching hardware are included so you can remove the stock bumper and fit a stronger recovery point and tougher fascia.

Fabricated from 6061 T6 aluminium, the bumper shows a machined, low-profile design with a metallic look that emphasises strength and wear resistance. The package contains the screws and washers needed for assembly; note the product does not support the original skid plate and the skid plate must be removed to install the bumper.

Packing includes

  • Front Bumper - 1pcs
  • D-rings - 2pcs
  • Stainless Steel Round Head Screw 3x10 - 4pcs
  • Stainless Steel Flat Head Screw 3x10 - 4pcs
  • Aluminium washer 3m - 4pcs

Original Name / Part No:

1

Specifications

  • Item: Front bumper set with D-rings and hardware - 15pcs
  • Material: Aluminium 6061 T6
  • Model Number: TRX6330F
  • Compatibility: TRAXXAS TRX6 Mercedes-Benz

For TRX6 owners after a lightweight, robust aluminium bumper that moves the servo forward to tune front balance and crawling behaviour, this unit fits in place of the stock bumper using the supplied hardware; remove the skid plate before fitting.

This item is compatible with

  • TRAXXAS-1/10 TRX-4 MERCEDES-BENZ G500

Is any trimming needed to fit the bumper?

No trimming is typically required for standard TRX6 Mercedes-Benz mounts, but the skid plate must be taken off to clear the bumper profile.

Can I fit a winch behind this bumper?

The bumper provides mounting points and clearance for some compact winches, but check your specific winch footprint against the bumper profile before buying.

Will this affect approach angle?

The aluminium bumper has a low-profile shape designed to keep approach angles similar to stock, though exact change depends on your body and skid plate removal.

What tools are recommended for installation?

A set of hex drivers, small sockets and a basic screwdriver set are usually enough to remove the skid plate and fit this bumper using the supplied hardware.

Copyright © 2008-2026 rcjaz.com.au All rights reserved