Turbulence D3 Tail Rudder Guide HI0414493 by Hirobo  [HI0414493]

Tail Rudder Guide Designed for Turbulence D3

The Hirobo HI0414493 rudder guide functions as an RC tail control component crafted for Turbulence D3 helicopter assemblies. Its low-wear bearing surface helps stabilise tail pitch and cuts down on excessive movement in the tail linkage during use and adjustments.

Fitting is direct for anyone familiar with tail sections: open the tail boom access, check the guide against the rudder housing for correct orientation, and press it home so the linkage articulates freely. Ensure the tail servo is set to neutral and retorque retaining hardware to the manufacturer's specifications when finishing the job.

When tuning, the guide provides a consistent reference for tail pitch setup and helps minimise uneven wear on linkage pins. Inspect the part periodically after impacts or prolonged running, and replace if noticeable clearance appears to preserve tail control precision.