Upgrade for TAMIYA CC-02: Front Upper Link Arms JR-CC207-LB by Jazrider  [JR-CC207-LB]

Tamiya CC-02 Chassis Aluminum Front Upper Suspension Link Arms (Blue)
Price:
AUD$12.64
Brand:
JAZRIDER
Model:
JR-CC207-LB
Condition:
Brand New
Available in shop
Write a review

Tuning impact of CC-02 front upper link arms

The JR-CC207-LB front upper suspension link set is produced in blue-anodized aluminum for use on the TAMIYA CC-02 chassis. These parts offer a firmer mounting point for the upper link locations and can change handling behavior compared with the stock setup.

By replacing plastic links with aluminum, the front suspension pivot becomes more consistent under load, which affects static camber, roll-center and steering feedback. Hobbyists often fit metal arms when dialing in suspension settings for more repeatable results.

Installation uses the CC-02 existing link pivots and hardware at the front upper mounting points. After fitting, re-check alignment and suspension travel, and make incremental adjustments to shocks or link lengths to fine tune the vehicle response.

Note: designed as an aftermarket upgrade for TAMIYA CC-02 models to refine suspension tuning and consistency.

How do these arms change front camber behavior?

Switching to aluminum reduces flex at the upper pivot, helping to maintain a chosen static camber under cornering loads for more predictable handling.

Should I change shock settings after fitting?

Small adjustments to damping or spring preload may be beneficial because the stiffer link interface alters suspension response; test and tune incrementally.

Are there measurable gains on handling?

Expect a more consistent feel rather than large performance jumps. The key advantage is repeatable geometry under stress, which aids fine tuning.

Copyright © 2008-2026 rcjaz.com.au All rights reserved