Upgrade Front Suspension Arm for LAZER ZX7.5 - Kyosho LA429  [KY-LA429]

Kyosho LA429 - Front Suspension Arm(ZX7.5)
Price:
AUD$15.31
Brand:
Kyosho
Model:
KY-LA429
GTIN:
4548565524402
Condition:
Brand New
Write a review

ZX7.5 Front Suspension Overview

The Kyosho LA429 front suspension arm is supplied as a replacement part for the LAZER ZX7.5 chassis, intended to return correct front linkage function after wear or damage.

The arm uses the ZX7.5's mounting points and original fasteners; during replacement, check that pivots move freely and that screws engage fully. Clean hardware before reassembly and follow the chassis recommendations for torque settings.

As a component of front suspension geometry, changing this arm influences alignment repeatability and setup tuning. After replacement, verify camber, toe, and ride height to ensure handling targets are met before running.

Compatibility

Compatible with: LAZER ZX7.5.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does swapping the arm affect camber and toe?

Replacing the arm returns the suspension to its intended geometry, which can change camber and toe readings; remeasure alignment and adjust links as needed for desired handling.

Should I recheck ride height after installation?

Yes. Fitment can shift ride height slightly; confirm and adjust ride height during your setup sequence to retain consistent handling characteristics.

Any fitment tips for setup accuracy?

Use the same pivot hardware and torque values as the chassis manual recommends, and log link positions so you can restore or compare settings after replacement.

Copyright © 2008-2026 rcjaz.com.au All rights reserved