Xenon Racing PPR64-39 Off-Road Friendly 64P/39T Pinion  [PPR64-39]

Xenon Racing Xenon Pinion Gear 64P/39T PPR64-39
Price:
AUD$13.55
Brand:
Xenon Racing
Model:
PPR64-39
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Get Reliable Drive with Xenon Racing PPR64-39

The Xenon Racing PPR64-39 pinion is engineered with a 64-pitch and 39-tooth profile to improve the transfer of power in RC drivetrains. Its configuration supports balanced torque delivery and consistent mesh, making it a good fit for both trail and track use. Use it to replace worn parts or to fine-tune your gear ratios.

Performance Traits of the 64P/39T Pinion

This 64P/39T pinion offers accurate tooth engagement for reduced backlash and smoother running under load. The tooth count helps maintain steady acceleration and avoids sudden spikes in motor load, which many drivers find helpful for controlled outings.

Fitment Advice and Best Practices

The pinion will slot into most compatible gearboxes with minimal fuss, but always verify spur compatibility and clearance. Set mesh carefully and retest after a few runs to confirm there is no abnormal wear or noise, especially after off-road sessions.

Is the PPR64-39 suitable for rally style setups?

It suits many rally and mixed-surface setups as long as the spur gear pitch matches and the gearbox is sealed well against dirt to prevent accelerated wear.

Does this pinion reduce drivetrain noise?

Accurate 64-pitch teeth help lower noise compared to coarser pitches, but correct mesh is key to quiet operation, so use small adjustments to find the sweet spot.

What should I check after off-road runs?

Clean out any grit from the gearbox, inspect the pinion and spur for nicks, and verify the set screw remains tight before your next session.

Copyright © 2008-2025 rcjaz.com.au All rights reserved