XRAY #301114 T1FK(05) 2.0mm Graphite Chassis Upgrade for 3700  [XR-301114]

XRAY #301114 ChaSSis T1FK(05) - 2.0 mm Graphite For 3700
Price:
AUD$175.43
Brand:
XRAY
Model:
XR-301114
Condition:
Brand New
Write a review

Chassis Renewal for XRAY #301114 T1FK(05) 3700

Owners of older XRAY T Series models can swap to the XRAY #301114 T1FK(05) 2.0mm graphite chassis to restore original geometry while gaining long term durability. It is a straightforward upgrade for vintage 3700 cars.

Lightweight Rigidity from Graphite

At 2.0mm thickness, the graphite plate adds stiffness with minimal weight penalty, helping to stabilise cornering and maintain consistent suspension behavior across runs.

Who Should Fit This Chassis

This part suits XRAY T1FK(05) owners and specifically supports the 3700 configuration, allowing collectors and racers to keep classic setups competitive with minimal adjustments.

Installation and Care Notes

Match mounting holes carefully and tighten screws in sequence to avoid introducing stress. Check fasteners after a few sessions and inspect for wear at the mounting interfaces.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Most aftermarket mounts that follow T1FK(05) spacing will fit, but verify mounting holes and clearances before final assembly if using non OEM hardware.
You may notice firmer handling, so small adjustments to roll centers, damping or ride height can help fine tune balance after the swap.
Avoid hard impacts on sharp curbs and keep the chassis free of accumulated grit. Tighten screws to spec and replace any stripped threads to prevent stress cracks.

Copyright © 2008-2025 rcjaz.com.au All rights reserved