XRAY 306530 - T4'17 Chassis Stiffener 2.0mm Race Tune  [XR-306530]

XRAY 306530 T4\'17 Graphite Chassis Stiffener 2.0mm
Price:
AUD$24.61
Brand:
XRAY
Model:
XR-306530
Condition:
Brand New
Write a review

XRAY 306530 Graphite Stiffener for T4'17 Chassis Rigidity

The XRAY 306530 T4'17 Graphite Chassis Stiffener increases torsional rigidity for the T4 2017 chassis using a 2.0mm graphite panel. This upgrade helps the car hold its line better and respond more directly to throttle and steering inputs.

Why Use a Graphite Stiffener

Using 2.0mm graphite provides a direct stiffness boost without significant extra mass. The result is firmer cornering and reduced chassis roll, which aids drivers tuning for faster lap times or quicker direction changes.

Installation Notes to Avoid Issues

When fitting, ensure the plate sits flush and fasteners are torqued evenly to manufacturer spec. Check for any interference with electronics or suspension parts after install to keep handling predictable.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the XRAY 306530 reversible left to right?

The stiffener is symmetric for the T4 2017 chassis so orientation is straightforward, but check alignment before final tightening.

Should I change suspension settings after fitting?

Yes, a stiffer chassis often calls for softer springs or different antiroll adjustments to retain balance, especially on bumpy surfaces.

Can graphite break from impacts?

Graphite is strong but brittle under sharp strikes. Inspect the plate after heavy collisions and replace if any cracks appear to avoid chassis misalignment.

Copyright © 2008-2025 rcjaz.com.au All rights reserved