XRAY 325391 Aluminium Shim 10x12x1mm Set of 2  [XR-325391]

XRAY 325391 - Aluminium Shim 10x12x1mm (2)
Price:
AUD$17.32
Brand:
XRAY
Model:
XR-325391
Condition:
Brand New
Write a review

Fine tuning for XB2 differentials with XRAY 325391

Hobbyists adjusting XB2C and XB2D cars can rely on the XRAY Aluminium Shim 10x12x1mm to achieve accurate spacing. This two piece set helps align the #325003 XB2 Ball Adjustable Differential LCG and #324902 XB2 Gear Differential LCG for consistent mesh and reduced slop.

Durable shim material for consistent results

Made from aluminium, these shims maintain thickness under load and resist routine wear. The 1mm thickness is useful for small, repeatable setup steps that influence handling and drivetrain feel.

Which models are supported

These shims suit XB2C and XB2D variants from the 2016 to 2019 production run, making them handy for maintenance, rebuilds, or setup experiments on older cars.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is special tooling required to fit these shims?

No specialised tools are necessary; basic diff assembly tools and a feeler gauge or calipers to check clearances will suffice.

Can I use these shims to tune preload?

They are intended to set spacing and mesh rather than spring preload, but changing spacing can affect the effective preload and diff behaviour.

Are these shims reversible or directional?

They are flat washers with uniform thickness, so orientation does not matter; focus on correct placement within the differential stack.

Should I replace shims when rebuilding a diff?

Inspect existing shims for burrs or wear; replacing with new shims like these ensures consistent spacing after a rebuild.

Copyright © 2008-2025 rcjaz.com.au All rights reserved