XRAY 338186 Front Spring Set Medium-Hard Purple Track Edition  [XR-338186]

XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)
Price:
AUD$19.06
Brand:
XRAY
Model:
XR-338186
Condition:
Brand New
Write a review
alt="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)" title="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)"
alt="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)" title="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)"
alt="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)" title="XRAY 338186 Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)"

Track-Proven XRAY 338186 Springs for NT1

The XRAY 338186 Spring-Set supplies a pair of medium-hard front springs tailored for the NT1 chassis, giving predictable rebound and consistent front-end behaviour. Powder-coated purple for quick sorting, these matched springs are aimed at precise front tuning for lap-based running.

Features Overview

  • Compatibility: Specifically matched to NT1 front assemblies for accurate fit and geometry.
  • Tension: Medium-hard setting for controlled front response without excessive stiffness.
  • Color: Purple finish for rapid visual identification during setup swaps.
  • Precision-Crafted: Each spring is checked and paired to ensure consistent performance across both sides.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What surfaces suit these medium-hard springs?

They perform well on smooth indoor and prepared outdoor tracks where controlled front grip and predictable turn-in are needed.

Should I match these springs to a specific rear spring rate?

Rear spring choice depends on handling balance; try a slightly softer rear to complement the medium-hard front springs for increased rotation if required.

How can I check spring matching before use?

Measure free length and coil spacing, and compare both springs; XRAY 338186 springs are paired at the factory but a quick check avoids uneven front behaviour.

Copyright © 2008-2025 rcjaz.com.au All rights reserved