XRAY 345001 Front One-Way Assembly - Hardcoat 7075 T6 with CNC Lightweight Adapters  [XR-345001]

XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters
Price:
AUD$157.72
Brand:
XRAY
Model:
XR-345001
Condition:
Brand New
Write a review
alt="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters" title="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters"
alt="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters" title="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters"
alt="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters" title="XRAY 345001 Front One-Way - Hard Coated + Lightweight Adapters"

Built for consistent front-end performance

The XRAY 345001 Front One-Way Set is intended for 1/10 touring use and is machined from Swiss 7075 T6 aluminium with a hardcoat to stand up to track wear. The one-way unit delivers predictable engagement for controlled corner exits and acceleration.

One-way bearing care and notes

This kit ships with German one-way bearings that are factory-pressed and hand-ground to achieve tight tolerances. These bearings should be cleaned and lightly oiled using recommended products such as #106231 HUDY One-way Lube to maintain smooth operation. Keep in mind the bearings are not designed to be replaced individually.

Precision CNC adapters trimmed for weight

Included are CNC-machined diff outdrive adapters made from HUDY Spring Steel and finished by precision grinding and polishing. The adapters are manufactured to be about 25% lighter than conventional units, reducing rotating weight while preserving structural strength for typical racing demands.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I clean the one-way bearings?

Use a mild solvent to remove dirt and old lubricant, dry fully, then add a small amount of HUDY One-way Lube #106231. Avoid over greasing, which can attract debris.

What happens if a bearing fails?

Since the bearings are pressed in and non-replaceable, a failed bearing typically requires replacing the entire one-way set. Regular inspection helps catch wear before failure.

Do lightweight adapters need special care?

Treat the CNC-machined HUDY Spring Steel adapters like any precision driveline part: avoid impacts, check for burrs, and ensure they are seated and torqued correctly to prevent premature wear.

Copyright © 2008-2025 rcjaz.com.au All rights reserved