XRAY 345550 Composite 50T Spur Gear - Off-Road Favourite  [XR-345550]

XRAY 345550 Composite 2-Speed Gear 50T (1st)
Price:
AUD$22.78
Brand:
XRAY
Model:
XR-345550
Condition:
Brand New
Write a review
alt="XRAY 345550 Composite 2-Speed Gear 50T (1st)" title="XRAY 345550 Composite 2-Speed Gear 50T (1st)"
alt="XRAY 345550 Composite 2-Speed Gear 50T (1st)" title="XRAY 345550 Composite 2-Speed Gear 50T (1st)"

Race-Grade Composite 50T Spur Gear

The XRAY 345550 Composite 2-Speed Gear 50T (1st) is aimed at racers who want durability without excessive rigidity. This composite formulation yields a sensible balance of toughness and controlled flexibility for endurance under hard use.

True Running Through Careful Manufacturing

Designed to handle high torque and shear while keeping inertial weight low, the gear supports better acceleration and drivetrain efficiency. Manufacturing in a dedicated mould promotes even distribution of material for wobble-free rotation.

Simple Ratio Changes for Track and Trail

Available in popular tooth counts, the 50T lets competitors fine-tune ratios to match track traction or off-road grip. The clear stamped tooth marking speeds up identification and pitside changes.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this spur gear match my car's spline and shaft size?

The gear follows standard 1/10 scale dimensions used by many manufacturers, but you should confirm spline count and shaft diameter on your transmission before fitting.

Can I run high-power setups with this composite gear?

Composite gears cope well with elevated loads thanks to their mix of strength and flex; however, high-power motors increase wear rates and regular inspection is advised.

Any tips for installing the spur gear?

Ensure the gear is clean and properly seated on the shaft, check mesh with the pinion, and confirm the stamped tooth count before finalising adjustments.

How do I identify the tooth count quickly?

Look for the stamped number on the gear face which indicates the tooth count, making it straightforward to verify the selected ratio at the track.

Copyright © 2008-2025 rcjaz.com.au All rights reserved