XRAY 345858-G Graphite 18T Low-Friction Front Belt Pulley Performance Edition  [XR-345858-G]

XRAY 345858-G - LOW Friction Composite Front Belt Pulley 18T o6 - Center - Graphite
Price:
AUD$19.41
Brand:
XRAY
Model:
XR-345858-G
Condition:
Brand New
Write a review

Sharper Response with XRAY 345858-G

For racers focused on handling and throttle precision, the XRAY 345858-G Graphite 18T Low-Friction Front Belt Pulley delivers a lightweight, stiff option for the RX8E 2023 front drive. The engineered graphite composite helps keep mass down without sacrificing strength.

Performance from Graphite

Using graphite reduces internal friction points and cuts rotational weight at the front of the drivetrain. That translates to crisper acceleration and improved steering feedback on both short and flowing circuits.

Installation and Parts Information

This 18T pulley is made to align with the RX8E 2023 centre shaft assembly, providing a tight installation. The pulley is sold individually; the composite cover set can be obtained separately under part number #345800-G if replacing the full pulley cover.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this pulley need shim tuning?

Minor shimming may be required to achieve perfect belt alignment depending on your chassis setup; check fitment after initial installation.

Is graphite brittle compared to aluminium?

Graphite composites are lightweight and durable for this application, though they have different failure modes than metal; inspect for cracks after hard impacts.

What should I check after fitting?

Verify belt tension, watch for rubbing on the cover area, and run a few controlled laps to ensure stable engagement before pushing limits.

Copyright © 2008-2025 rcjaz.com.au All rights reserved