XRAY 348417 17T 7075 T6 Pinion Gear Hard-Coated  [XR-348417]

XRAY 348417 XCA Aluminum Pinion Gear 17T (1st) - 7075 T6 - Hard Coated -Large
Price:
AUD$32.82
Brand:
XRAY
Model:
XR-348417
Condition:
Brand New
Write a review
alt="XRAY 348417 XCA Aluminum Pinion Gear 17T (1st) - 7075 T6 - Hard Coated -Large" title="XRAY 348417 XCA Aluminum Pinion Gear 17T (1st) - 7075 T6 - Hard Coated -Large"

High-Precision XRAY 348417 17T Pinion

The XRAY 348417 17T pinion combines 7075 T6 aluminium strength with a hard-coated finish to withstand regular track use. Its larger form helps position the engine slightly farther from the chassis bulkheads for cleaner alignment.

True Running from Precise Machining

Produced on a specialist gear cutter, this pinion receives exact tooth profiling to ensure smooth engagement and minimal vibration. Internal threads are cut to fit both standard and lightweight XCA clutchbells, making it flexible for different setups.

Marked Teeth and Range of Sizes

Each pinion is labelled with its tooth count so you can change ratios quickly between sessions. Available in commonly used sizes, these pinions are a practical choice when tuning acceleration versus top speed.

Specifications

  • Material: 7075 T6 Aluminum
  • Tooth Count: 17T
  • Compatibility: XCA Clutchbells (Standard & Lightweight)
  • Coating: Hard-Coated

Reliable and precisely made, the XRAY 348417 pinion is suited to racers and hobbyists seeking consistent gear engagement.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is special tooling required to fit this pinion?

No special tools are needed; use the correct sized wrench and ensure threads are clean. Hand-start the pinion to avoid cross-threading then tighten to spec.

Can this pinion be used for both on-road and off-road cars?

Yes. The material and hard coating suit a range of applications, though final ratio choice should match vehicle type and track surface.

How do I check for wear on the pinion?

Inspect tooth edges for rounding or chipping and check mesh pattern with a thin smear of gear-marking compound after a few runs.

Copyright © 2008-2025 rcjaz.com.au All rights reserved