Band of molded composite eccentric bushings for aluminum backside hub providers #353355 and #353365. The eccentric bushings are utilized for straight back suspension geometry modification. Exchanging the bushings enables 9 different geometry settings. Each bushing is marked for effortless identification.
The set of bushings includes the immediate following: 0 = no offset; opening in center of bushing 1 = gap offset 1mm from center 1.1 = hole offset 1mm right and 1mm horizontal from center 2 = 2° outboard toe-in bushing crucial: always utilize the same bushing on remaining and rear aluminum back hub if you employ an eccentric gap bushing (1, 1.1 and 2), left part must certanly be other toward right part.
