XRAY 358526 Heavy-Duty 16T Clutch Bell with 5x12x4mm Bearings  [XR-358526]

XRAY 358526 Clutch Bell 16T with Oversized 5x12x4mm Ball-Bearings - V2
Price:
AUD$49.06
Brand:
XRAY
Model:
XR-358526
Condition:
Brand New
Write a review

Sturdy 16T bell made for vintage racing demands

The XRAY 358526 16T Clutch Bell is milled from HUDY Gear Steel to provide a tough running surface for vintage RC drive trains. Its construction aims to limit wear and deliver consistent engagement lap after lap.

Upgraded 5x12x4mm bearings for higher loads

Instead of standard 5x10mm units, XRAY fits oversized 5x12x4mm ball-bearings with thicker walls and larger 2.0mm balls to improve load capacity and decrease the chances of failure during long stints.

Controlled heat treatment and greasing

The clutch bell is heat treated to improve strength and longevity, and the bearings receive a high-temp grease so they keep turning smoothly under sustained high revs.

Selectable tooth counts to fine tune ratios

Choose from 15T, 16T, 17T, and 18T clutch bells to dial in acceleration or top speed according to track conditions and motor setup.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is fitting the oversized bearing difficult for a home mechanic?

Fitting requires checking shaft diameter and using the correct press or driver to avoid bearing damage. If you have basic tools and follow proper seating practice, installation is straightforward.

Which surfaces suit this clutch bell best?

It performs well on hard-packed surfaces and sealed tracks where consistent load and high RPMs are common. For very loose or soft surfaces adjust gearing to protect drivetrain components.

Any special break-in for the bearings and bell?

A short, controlled run at moderate speed followed by inspection and relube is enough to seat the bearings and confirm smooth operation.

Copyright © 2008-2025 rcjaz.com.au All rights reserved