XRAY 373018 - X1'21 Right-Side Aluminium Rear Motor Pod Bulkhead  [XR-373018]

XRAY 373018 - X1\'21 Aluminium Rear Bulkhead - Motor - Right
Price:
AUD$72.20
Brand:
XRAY
Model:
XR-373018
Condition:
Brand New
Write a review

Race-grade rear motor bulkhead for XRAY X1'21

The XRAY 373018 Aluminum Rear Motor Bulkhead is built for the X1'21 chassis, offering a tight, accurate right-side fit. Fabricated from Swiss 7075 T6 aluminum, it provides superior strength and resistance to wear. The black-coated surface gives a durable, low-glare finish suited to frequent track use.

Stiffer one-piece layout for steady handling

This single-piece bulkhead reduces twist and enhances rigidity compared to standard designs. Centering pins on the upper face ensure correct positioning of the upper pod plate, reducing the chance of unwanted movement after impacts.

Secure mounting and precise rear height tuning

The upper pod plate is fastened with four screws to improve structural stability. Eccentric bushing inserts allow precise adjustment of rear axle height, giving tuners control over traction and roll characteristics.

Specifications

  • Material: Swiss 7075 T6 Aluminum
  • Compatibility: XRAY X1'21 Series
  • Finish: Black-Coated
  • Mounting: 4-Screw Upper Pod Plate
  • Adjustment: Eccentric Bushing Inserts

An effective upgrade for racers aiming for a firmer, more repeatable rear end on XRAY X1'21 cars, engineered for longevity under competition use.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this bulkhead take heavier brushless setups?

Yes, the Swiss 7075 T6 material and one-piece design offer the strength to handle modern brushless motors and the loads they produce in racing conditions.

Is any shimming required when installing?

Most installations do not require additional shims. Use the centering pins to align the upper pod plate and check axle endplay as part of routine setup adjustments.

How should I maintain this aluminium bulkhead?

Keep mounting surfaces clean and inspect screws for loosening after sessions. Lightly clean the coated surface and check eccentric bushings for free movement during service intervals.

Copyright © 2008-2025 rcjaz.com.au All rights reserved