XRAY 931016 Steel Sealed Ball Bearings 10x16x4 Oiled Set  [XR-931016]

XRAY 931016 - Ball-bearing 10x16x4 Steel Sealed - Oil (2)
Price:
AUD$15.82
Brand:
XRAY
Model:
XR-931016
Condition:
Brand New
Write a review

Consistent spin from XRAY 931016 bearings

The XRAY 931016 steel sealed ball bearings are built to provide dependable rolling action in tight spaces. At 10x16x4mm they deliver consistent contact and help stabilise rotating parts in RC vehicles.

Durable sealed construction

These bearings are finished to reliable tolerances and come sealed to keep grit out. The inclusion of AeroShell Fluid 12 gives a low-friction start and reduces wear during break-in.

Applications and fitment tips

Compatible with models such as the NT1, these bearings suit wheel hubs, gearbox shafts, and other compact locations needing 10x16x4 bearings. They are a practical choice for both track days and park runs.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use these in high-RPM motors?

They are suitable for many high-RPM applications, though check housing tolerances and heat limits for your specific motor setup.

How do I spot a worn bearing?

Listen for roughness, feel for play, and check for heat after a run. Any binding or noise indicates it is time to service or replace the bearing.

Is the supplied oil suitable for racing?

AeroShell Fluid 12 is a good general lubricant for bearings; racers sometimes swap to lighter or specialised oils depending on conditions and preference.

Do these bearings need spacers?

Some installations require spacers or shims to achieve correct endplay. Check your model's manual and fit bearings with the specified clearances.

Copyright © 2008-2025 rcjaz.com.au All rights reserved