XRAY #964071 Thin Shim Set 7x12x0.3mm 10 Pack  [XR-964071]

XRAY #964071 Washer S 7x12x0.3 (10)
Price:
AUD$15.50
Brand:
XRAY
Model:
XR-964071
Condition:
Brand New
Write a review

Thin Shims for Precise Model Adjustment

The XRAY #964071 Washer Set 7x12x0.3mm provides a reliable pack of ten thin washers for fine tuning your RC. These small shims help you achieve the exact clearances needed for optimal assembly alignment.

Common Uses in Cars and Buggies

With a 7mm inner bore and 12mm outer diameter at 0.3mm thick, these washers are a go-to option for adjusting gear mesh, shimming bearings, or refining suspension pickup points. They work well across a range of models and running styles.

Consistent Thickness for Stable Setup

XRAY washers are manufactured to maintain uniform thickness so adjustments remain stable over time. Using the right shim thickness reduces unwanted movement in rotating and suspension parts, helping keep lap times consistent.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can these be stacked for more thickness?

Yes, stacking thin washers is a common method to reach non standard gaps. Check clearances after each stack to avoid binding.

Do these work for both front and rear differentials?

They can be used where a 7x12x0.3mm shim is specified for differential spacing or bearing clearance. Verify the part locations that need shims in your setup notes.

Should I inspect washers after crashes?

Yes, check for bends or nicks after impacts. Damaged shims can alter spacing and should be replaced; the XRAY #964071 ten pack covers multiple needs.

Copyright © 2008-2025 rcjaz.com.au All rights reserved