Xray T4 FWD Chassis Plate Carbon 2.25mm - Arrowmax AM-920011  [AM-920011]

Arrowmax AM-920011 AM Medius Xray T4 FWD Chassis Carbon 2.25mm MM
Price:
AUD$99.48
Brand:
Arrowmax
Model:
AM-920011
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

AM Medius carbon chassis option for T4 FWD rigs

The Arrowmax AM-920011 AM Medius carbon chassis plate is an aftermarket replacement for the Xray T4 front-wheel-drive configuration. Made from Carbon 2.25mm, it is intended for 1/10 electric on-road cars where chassis plate choice is part of setup tuning.

The content below covers compatibility reminders, simple installation pointers, and how a carbon plate factors into handling adjustments. This hobby-grade item is for model car tuning and aims to modify stiffness and chassis response.

Specifications

  • Item: AM Medius Xray T4 FWD Chassis
  • Material: Carbon 2.25mm
  • Model Number: AM-920011
  • Compatibility: Xray T4 FWD

Install this chassis plate to tune stiffness and handling on Xray T4 FWD models; check required fasteners and compatibility details via the retailer or the official parts diagram prior to fitting.

Is the AM-920011 a direct swap?

The plate is intended as a direct component option for Xray T4 FWD chassis layouts, but verify hole positions and any necessary spacers before swapping.

How should I adjust my setup after fitting?

After fitting a stiffer plate like 2.25mm carbon expect changes to weight transfer; consider softer rear springs or different damper settings to rebalance handling.

Can I run this on all surfaces?

It suits typical on-road surfaces used in touring car racing; very rough surfaces increase risk of impact damage so inspect the plate regularly.

Should I replace after a crash?

Yes, check for cracks or delamination around mounting points after significant impacts and replace the plate if you find structural damage.

Copyright © 2008-2026 rcjaz.com.au All rights reserved