Xray X4 Rear Narrow Split Upper Deck - Graphite 2.0 Upgrade by Factory Pro O-XCP016  [FP-O-XCP016]

Price:
AUD$17.49
Brand:
Factory Pro
Model:
FP-O-XCP016
Condition:
Brand New
Write a review

Narrow split upper deck, rear position

Factory Pro O-XCP016 is a rear narrow split upper deck produced in Graphite 2.0 as an aftermarket upgrade for the Xray X4 platform. It changes the stiffness profile at the rear top-deck to give tuners another tool for balancing rear traction and chassis feel.

Fitting the deck is a direct swap at the X4 rear upper deck location using the existing screw pattern. Routine model workshop tools like hex drivers are adequate; always verify threads and fastener condition during replacement to secure the part correctly.

This deck should be treated as part of an overall setup package: altering top-deck stiffness affects load transfer during acceleration, braking and cornering, so record changes and pair with damper or spring adjustments to reach the desired handling.

Does the Factory Pro O-XCP016 replace the stock rear deck?

Yes, it is designed to fit the same rear upper deck position on the Xray X4 and uses the stock mounting pattern for a simple replacement.

Will this change my car's handling a lot?

Changes are subtle but measurable; the Graphite 2.0 deck adjusts stiffness distribution which can influence rear traction and rotation, so expect incremental differences rather than a radical overhaul.

Any tips for testing this part at the track?

Run a baseline session with your stock deck, then fit O-XCP016 and compare lap times and driver notes; change only springs or dampers afterward to isolate effects.

Copyright © 2008-2026 rcjaz.com.au All rights reserved