XRAY X4F'25 Front Graphite Upper Deck - Factory Pro O-XCP022 Special Edition  [FP-O-XCP022]

Price:
AUD$15.03
Brand:
Factory Pro
Model:
FP-O-XCP022
Condition:
Brand New
Write a review

X4F'25 front deck details

This Factory Pro O-XCP022 front upper deck is offered as an aftermarket, direct-fit plate for the XRAY X4F'25 chassis and is produced from 2.0mm graphite for the front upper area. As a stiffness control element it is used by drivers seeking to refine front-end characteristics during setup.

When fitting, align the graphite deck to the X4F'25 mounting points and ensure screw holes line up so the plate sits flush without restricting suspension travel. Check for any interference around the servo, steering links and adjacent hardware after installation. The deck replaces the stock upper part to change front chassis behaviour.

Tuning guidance: a graphite 2.0 front deck often increases stiffness at the nose, sharpening turn-in and changing steering feel. Make incremental adjustments and evaluate each change over a few laps to see how the deck works with your shock settings and tyres.

Can I fit this deck to different X4F'25 chassis years?

The O-XCP022 is designed for the X4F'25 platform; confirm your specific chassis revision before fitting as small layout differences can affect alignment.

Does the graphite deck change corner entry behaviour?

Yes, increased front stiffness typically sharpens initial turn-in and can reduce front compliance, so you may need to rebalance rear stiffness or adjust damping to maintain stability.

What should I watch for during the first test runs?

Listen for binding sounds, watch for abnormal tyre wear, and note any sudden oversteer or understeer tendencies so you can reverse or refine changes safely.

Copyright © 2008-2026 rcjaz.com.au All rights reserved