XRAY X4F'25 Graphite Main Plate 2.25 Upgrade - Factory Pro O-XCP021  [FP-O-XCP021]

Price:
AUD$65.69
Brand:
Factory Pro
Model:
FP-O-XCP021
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Factory Pro main chassis for X4F'25

The Factory Pro O-XCP021 main chassis is specified for XRAY X4F'25 kits and is manufactured in 2.25 graphite. It aligns with the X4F'25 mounting arrangement so the kit's original attachment points remain usable.

This chassis is ideal for replacing a broken plate or switching back to stock geometry during tuning sessions. As the structural base it locates suspension pick-ups, gearbox position, and electronics mounting, so verify all mounting faces and hole positions during build-up.

Assembly pointers: transfer the existing kit hardware where applicable, check drivetrain mesh after reinstalling the gearbox, and confirm servo and ESC alignments match the original layout. Fine adjustments should be made with the kit shims and spacers instead of modifying the plate itself.

Specifications

  • Item: Main chassis
  • Material: Graphite
  • Model Number: O-XCP021
  • Compatibility: Xray X4F'25

This O-XCP021 chassis fits X4F'25 kits without adapters; use the kit hardware and follow the original torque sequence for dependable assembly.

Is the Factory Pro plate dimensionally identical to the original?

The plate follows the X4F'25 geometry and mounting pattern, so it should match the original dimensions relevant to mounting and drivetrain alignment.

Will this affect my setup notes?

Because the plate maintains factory geometry, your existing setup notes for ride height and pick-up locations remain valid; adjustments should focus on suspension and weight balance.

Can I use this plate after a crash repair?

Yes, it is commonly used to replace cracked or distorted chassis plates after impact, provided the rest of the kit components are sound.

Any special checks after fitting the new chassis?

Check the gearbox and drivetrain mesh, confirm free suspension travel, and ensure electronics mount clearances are unchanged from the original layout.

Does graphite require different maintenance than aluminium?

Graphite needs careful handling: avoid over-tightening fasteners, clean residue with isopropyl alcohol, and inspect for hairline cracks after heavy impacts.

Should I replace shims when switching plates?

Reuse the kit shims and spacers for final alignment; only change shim stacks if you detect binding or altered clearances after fitting the new plate.

Copyright © 2008-2026 rcjaz.com.au All rights reserved