YD-2S Upgrade Molded Main Chassis Y2-002SA for YD-2S/YD-2S PLUS - Yokomo  [Y2-002SA]

Yokomo Y2-002SA Molded Main Chassis for YD-2S/YD-2S PLUS
Price:
AUD$50.34
Brand:
Yokomo
Model:
Y2-002SA
GTIN:
0639342190430
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YD-2 category
Write a review

Tuning impact and setup notes

The molded main chassis is a resin replacement part intended for the YD-2S platform and suitable as a setting component on YD-2S PLUS variants. Its resin construction is chosen to provide a consistent baseline flex without extra machining.

Only the DP-YD2* model codes listed are supported. The part uses the stock mounting points so it generally installs as a direct swap. Always trial fit electronics and drivetrain components to confirm there is sufficient clearance before final assembly.

In tuning terms the resin chassis gives a predictable change in flex that drivers use to influence overall balance. Adjust suspension settings and weight distribution in tandem to fully exploit the handling changes this chassis provides during drift or circuit practice.

Specifications

  • Item Molded main chassis
  • Material Resin
  • Model Number Y2-002SA
  • Compatibility DP-YD2S / DP-YD2SG / DP-YD2SS / DP-YD2SAC / DP-YD2S-PL / DP-YD2SX / DP-YD2SX2 / DP-YD2SX2R / DP-YD2SX2P

Compatible Models

  • DP-YD2S
  • DP-YD2SG
  • DP-YD2SS
  • DP-YD2SAC
  • DP-YD2S-PL
  • DP-YD2SX
  • DP-YD2SX2
  • DP-YD2SX2R
  • DP-YD2SX2P

Pick this resin molded chassis when you want to influence stiffness and handling while keeping the original mounting geometry for straightforward setup trials.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does this chassis alter cornering balance?

The molded resin changes overall flex, which shifts weight transfer characteristics. Expect a subtle change in front-to-rear bite; use spring and damper adjustments to rebalance.

Should I change damper settings after installation?

Yes. Because chassis stiffness affects chassis roll and yaw behavior, revisit damper compression and rebound to match the new flex profile.

Is this chassis suitable for both drift and circuit setups?

It is used in both disciplines. For drifting you may favour more predictable lateral flex, while on circuit you will tune for consistent lap-to-lap stability.

How should I approach weight redistribution after fitting?

Make incremental changes to ballast location and component placement, then test session by session to see how the new chassis flex alters balance.

Can this chassis be combined with stiffer mounts or braces?

Yes. Combining the molded chassis with different mount or brace options is a common way to tune effective stiffness. Test combinations to find the best handling outcome.

Copyright © 2008-2026 rcjaz.com.au All rights reserved