YD-2TC Left/Right Steering Blocks Compatible with YD-2TC - Yokomo Y2-415SC  [Y2-415SC]

Yokomo Y2-415SC Steering Block for YD-2TC
Price:
AUD$6.30
Brand:
Yokomo
Model:
Y2-415SC
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YD-2 category
Write a review

YD-2TC Left and Right Steering Blocks

This steering block set is tailored for YD-2TC chassis, supplied as a matched left and right pair to replace worn steering units. Replacing both sides restores intended steering geometry and maintains consistent handling across corners.

Containment: includes left and right steering blocks, 1 each, supplied as 2 pcs total. These blocks attach to the YD-2TC steering knuckle mounting points and use the chassis existing wheel hub and kingpin locations.

Installation notes: verify kingpin and hub components before assembly, reuse the original hex screws and bearings if your chassis guide recommends it, and re-check toe and camber after fitting. Treat these blocks as fundamental steering geometry parts when dialing in turn-in and mid-corner balance.

Compatibility

  • MRTC-YD2
  • MRTC-YD2CK
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is supplied with the steering blocks?

You receive a pair of steering blocks, one left and one right, provided as two pieces to fully replace the steering side components.

Will swapping these affect handling immediately?

Yes, because these blocks set the steering geometry. After installation, expect to check and possibly tweak toe and camber to restore your preferred turn-in and mid-corner behavior.

Any mounting gotchas to watch for?

Ensure kingpin alignment and that hub hardware is secure; improper hardware reuse can introduce play. Follow your chassis manual for torque and bearing placement.

Copyright © 2008-2026 rcjaz.com.au All rights reserved