Yokomo B10-008RGA Graphite Rear Arm for BD10 Chassis  [B10-008RGA]

Yokomo B10-008RGA Graphite molded rear lower suspension arm (57mm-Shock42mm) for BD10
Price:
AUD$20.17
Brand:
Yokomo
Model:
B10-008RGA
GTIN:
0639342202379
Condition:
Brand New
Write a review

Stiffer Graphite Rear Arm for Improved Response

The Yokomo B10-008RGA rear lower suspension arm is purpose made for the BD10 chassis and manufactured from sturdy graphite to increase structural stiffness. This translates into a more immediate handling feel and improved responsiveness under load. The design keeps the standard geometry with a 57mm separation between suspension pins and 42mm from the inner suspension pin to the shock pivot to ensure predictable tuning behaviour.

Compatible Models

  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the graphite arm change my rear roll behaviour?

Yes, the increased stiffness can reduce rear compliance which often lowers roll and can make the car feel tighter; adjust spring rates and antiroll balance as needed.

Are the pin spacings standard for BD10 setups?

The arm keeps the factory pin layout with 57mm between suspension pins and a 42mm distance to the shock pivot, so it works with standard BD10 setups.

How should I inspect the part after racing?

Check the mounting holes and pivot areas for signs of wear or loosening, and confirm pins remain secure after hard runs.

Copyright © 2008-2025 rcjaz.com.au All rights reserved