Yokomo B11-412F4H Front Stabiliser Bar Hard 1.4mm  [B11-412F4H]

Yokomo B11-412F4H Front swaybar Hard (1.4mm)
Price:
AUD$11.85
Brand:
Yokomo
Model:
B11-412F4H
GTIN:
639342203437
Condition:
Brand New
Write a review

Hard Front Stabiliser for Precise Steering

The Yokomo B11-412F4H front stabiliser bar enhances on-road stability and provides a more immediate steering feel. Produced with hardened material to maintain stiffness, the 1.4mm diameter is optimised for front use and gives reliable response across small suspension movements.

Suitable Yokomo Platforms

This hard front swaybar is compatible with a wide range of Yokomo chassis models including MRTC-BD11-1, MSR-BD11, MRTC-BD11A-1, MRTC-BD11FA, MRTC-BD11US, MSR-010FE, MSR-010FEA, MSR-BD12, MSR-BD12A, and MSR-BDFWD. Fit it when you need firmer front roll control for lap consistency.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this bar suitable for drifting or off-road use?

This 1.4mm hard front bar is aimed at on-road applications and circuit driving; it is not optimised for rough off-road terrain or typical drift setups where different characteristics are preferred.

Can I change effective stiffness by orientation?

Orientation and drop link position can alter effective roll stiffness. Follow chassis instructions and try small adjustments to achieve the balance you want without forcing mounts.

How should I road test after fitting the swaybar?

Start with short, low-speed runs to confirm there is no binding, then progress to full-speed laps while noting changes in turn-in and mid-corner behaviour to fine tune rear setup accordingly.

Copyright © 2008-2025 rcjaz.com.au All rights reserved