Yokomo B8-RTC-03 Graphite Rear Hub Carrier Off-Road Tuned for BD8 BD7 2016  [B8-RTC-03]

Yokomo B8-RTC-03 RTC Rear Hub Carrier (Graphite molded) for BD8/BD7 2016
Price:
AUD$7.20
Brand:
Yokomo
Model:
B8-RTC-03
GTIN:
3888
Condition:
Brand New
Write a review

Tighten Rear Toe Control for Yokomo BD8/BD7

The Yokomo B8-RTC-03 Rear Hub Carrier brings RTC rear toe control compatibility to BD8 and BD7 2016 chassis. Constructed from graphite-infused resin, it aims to combine light weight with higher stiffness to help drivers achieve more predictable rear behaviour.

Who It Fits and Why It Helps

Made for BD8 and BD7 2016 models, the part fits versions like MRTC-BD8-P, MRTC-BD8AP, MRTC-BD8, MRTC-BD8A, MRTC-BD8SV, MRTC-BD818A, and MRTC-BD818. The graphite element increases resistance to flex at the hub, improving the repeatability of rear toe settings when tuning for grip or rotation.

Practical Installation Advice

When installing the Yokomo B8-RTC-03, check that mounts align and bolts are torqued to spec to prevent slippage. The reduced weight of the graphite design means small toe changes alter handling without significantly affecting overall mass distribution.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the carrier compatible with BD8 competition kits?

This carrier is intended for BD8 and BD7 2016 chassis and compatible variants. For specific competition kit compatibility, compare mounting points to confirm fit.

Does graphite require special maintenance?

Graphite-infused resin parts do not need special care but inspect them regularly for cracks or wear, especially after impacts. Replace if you notice any structural damage that could affect toe settings.

Can I use this with my existing suspension arms?

Yes, provided your suspension arms match the BD8/BD7 2016 mounting layout. Verify clearances and bolt lengths during install to avoid interference.

Copyright © 2008-2025 rcjaz.com.au All rights reserved