Yokomo B9-302RA Right Center Bulkhead for BD9  [B9-302RA]

Yokomo B9-302RA Center bulkhead (Right) for BD9
Price:
AUD$36.35
Brand:
Yokomo
Model:
B9-302RA
GTIN:
0639342182282
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD919S category
Write a review

Right center bulkhead replacement

This right-side center bulkhead is an RC-scale replacement for BD9 chassis layouts, supplied as a single right half. It is aimed at racers and hobbyists who need a direct replacement while servicing BD9-based cars.

Confirm compatibility with the specific chassis variants listed by the manufacturer before installation. The center bulkhead locates key drivetrain and suspension components at mid-chassis, and the right half works together with the left half to complete the structure.

Fitting tips: check mating surfaces and fastener positions on MRTC-BD919 or MRTC-BD919S models, retain any reusable screws, and verify there is adequate clearance for driveshafts and linkages after assembly. This product is provided as an accessory for RC use.

Specifications

  • Item Center bulkhead (Right)
  • Material Not specified
  • Model Number B9-302RA
  • Compatibility MRTC-BD919, MRTC-BD919S (BD9)

Choose this right-side center bulkhead when replacing a damaged or worn unit on BD9-compatible cars, and confirm fitment against your MRTC-BD919 or MRTC-BD919S chassis prior to final assembly.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will swapping this part affect my car's handling?

Replacing a worn or damaged bulkhead with a correctly fitted unit should restore original geometry and handling. Always recheck setup and alignment after replacement.

Can I use aftermarket hardware when fitting this part?

Aftermarket fasteners can be used if they match the original thread and head profile, but ensure they do not alter clearances or interfere with adjacent parts.

Does replacing the bulkhead require corner weight or setup checks?

It is good practice to recheck suspension geometry and corner weights after replacing the center bulkhead to ensure consistent handling.

Are both halves interchangeable between left and right?

No. This item is the right-side half and is not interchangeable with the left-side unit due to mirror-image mounting points.

Should I inspect other parts when replacing this bulkhead?

Yes. Inspect driveshafts, bearings, and suspension link mounts for wear while the chassis is open to avoid repeat disassembly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved