Lower Bulkhead A for Yokomo BD9 - B9-32LA19A Front Left / Rear Right  [B9-32LA19A]

Yokomo B9-32LA19A Lower Bulkhead (A)(F Left/R Right) for BD9
Price:
AUD$43.92
Brand:
Yokomo
Model:
B9-32LA19A
GTIN:
0639342204472
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Tuning Impact: BD9 Lower Bulkhead (A)

This lower bulkhead (A) is designed for the BD9 chassis range and installs at the front left or rear right location. It is supplied as an individual replacement component for setup changes or repairs.

Swapping this part can influence suspension geometry and drivetrain clearance; check ride height, camber, and toe after replacement and make small adjustments to retain your tuned handling balance.

Specifications

  • Item: Lower Bulkhead (A), front left / rear right, 1 pcs
  • Material: Not specified
  • Model Number: B9-32LA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Yokomo lower bulkhead (A) for BD9-series cars, provided as a direct-fit spare to restore mounting locations and help retain tuned suspension and drivetrain relationships after maintenance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does replacing this bulkhead affect suspension geometry?

Replacement will restore the intended mounting points; slight variances in fit can change camber and toe. Recheck alignment and adjust shock lengths or link positions as needed.

Should I re-tune after installation?

Yes. After installing, verify ride height and basic alignment settings, then perform a short test run to confirm handling before full setup adjustments.

Will driveline clearance be affected?

If the bulkhead seats differently than the original, driveline clearance can change. Check prop shafts and diff positions during assembly to avoid binding.

Any quick checks to ensure tuning remains consistent?

Confirm suspension droop, shock travel, and wheel alignment after fitting. Small incremental adjustments help retain the car's known balance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved