Yokomo BD-009BFA - 3mm Front Inner Arm Pins for BD7 BD5 Chassis  [BD-009BFA]

Yokomo BD-009BFA Front Inner Suspension Arm Pins (3x42mm) for BD7/BD5
Price:
AUD$6.74
Brand:
Yokomo
Model:
BD-009BFA
GTIN:
0639342205226
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category
Write a review

Upgrade Your Yokomo BD7/BD5 Front Inner Pins

Swap in the BD-009BFA front inner suspension arm pins to reinforce the front suspension on your Yokomo BD7 or BD5. These 3mm precision pins are intended to improve resistance to crushing and wear, making them a practical pick for both track repairs and routine tuning.

What You Get and Where It Fits

The Yokomo BD-009BFA set fits a broad selection of Yokomo and compatible DP-YD2 platforms. The pack supplies two inner suspension arm pins, enough for a single pair replacement or as a spare set in your toolkit.

Applicable Models

  • DP-DIB2 / DP-DIB2R / DP-DIB2A / DP-DIB2RA / DP-DIB / DP-DIBR / DP-DIBG / DP-DIBRS / DP-DIBL / DP-DIBLR / DP-DIBLG / DP-DIBRSB
  • DP-YD4 / DP-YD4MR / MRTC-BD7RS / MRTC-BD715B / MRTC-BD715O / MRTC-BD715S / MRTC-BD716 / MRTC-BD716H / MRTC-BD716O / MRTC-BD716S / MRTC-BD
  • MRTC-BD818A / MRTC-BD818
  • DP-YD2 / DP-YD2G / DP-YD2PLS / DP-YD2EX / DP-YD2S / DP-YD2SG / DP-YD2S-PL / DP-YD2SX / DP-YD2E / DP-YD2EG / DP-YD2EPLS / DP-YD2EX2
  • DP-YD2ES / DP-YD2SS / DP-YD2SX2 / DP-YD2SX2R / DP-YD2EXB / DP-YD2EXR / DP-YD2SX2P / DP-YD2RPLS / DP-YD2SX3 / DP-YD2SX3R / DP-YD2SX3P
  • DP-YD2AC / DP-YD2RX / DP-YD2RXR / DP-YD2RXP / DP-YD2RAR / DP-YD2RAB / DP-YD2RAP / DP-YD2SAB / DP-YD2SAR / DP-YD2SAP / DP-YD2SSAB
  • DP-YD2SSAR / DP-YD2SSAP / DP-YD2RSAB / DP-YD2RSAR / DP-YD2RSAP / DP-YD2ACA / DP-YD2Z / DP-YD2ZG / DP-YD2ZX / DP-YD2ZXP / DP-YD2ZXR
  • SDR-020 / SDR-020P / SDR-020R
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Are these pins stronger than the originals?

The BD-009BFA pins are specified at 3mm diameter and are promoted for improved crush resistance. Actual durability depends on crash energy and installation; inspect after impacts.

Do I need to change any other parts when fitting these?

Usually you can fit the pins with existing arm hardware, but check bushings and retaining clips for wear and replace if they show play or damage.

Can these pins be used on conversion kits?

They are compatible with many DP-YD2 based conversion kits listed above, but always verify hole sizes and clearances on custom setups before final assembly.

Copyright © 2008-2025 rcjaz.com.au All rights reserved