Yokomo BD9 Track-Focused Mg Extra-Flex Plate Arrowspace - Arrowmax AM-900006  [AM-900006]

Arrowmax AM-900006 Yokomo BD9 Chssis Arrowspace Mg Extra Flex
Price:
AUD$195.83
Brand:
Arrowmax
Model:
AM-900006
Condition:
Brand New
Write a review

Arrowspace Mg plate for refined setup

This Arrowspace magnesium chassis plate is supplied by Arrowmax for the Yokomo BD9 touring car platform and serves as a direct-fit aftermarket option for drivers who want to dial in handling. The phrase "Extra Flex" signals the plate's intended influence on chassis behaviour rather than a precise rigidity measurement.

Practically, the plate shifts how the chassis reacts under braking, turn-in and mid-corner load transfer; racers combine it with spring, damper and ride-height changes as part of a full setup routine. It replaces the stock BD9 chassis panel when a magnesium component and modified flex characteristics are desired.

Fitment needs routine RC workshop skills: remove the original BD9 chassis, check that mounting holes line up, and refit using the vehicle's existing hardware to preserve geometry. Inspect clearance for the ESC and battery, and make sure the drivetrain runs true after installation. When testing, isolate the plate's effects by assessing corner entry and balance before making other setup tweaks.

Specifications

  • Item: Arrowspace magnesium chassis plate
  • Material: Magnesium
  • Model Number: AM-900006
  • Compatibility: Yokomo BD9

Use the plate within a methodical testing plan: record damper and spring changes while judging handling differences and switch back to the stock chassis if you need to re-establish a different baseline.

It is aimed at competitors and serious club drivers who want to experiment with chassis flex as part of lap time improvements, though it can be used for practice runs too.
You may need small ride-height or damper tweaks to restore the handling balance you prefer once the magnesium plate changes the chassis response.
Yes, the AM-900006 is designed to use the BD9's existing hardware and mounting points for a straightforward installation.
Handle magnesium parts carefully, avoid over-torquing screws, and check fasteners periodically after the initial test runs.
Make single-variable tests: change only one setup item at a time, log lap times and driver feedback, and compare with the stock chassis baseline.

Copyright © 2008-2026 rcjaz.com.au All rights reserved