Yokomo B-MAX2 C-Hub +5 Tuning Set (7075) - Arrowmax AM-MAX2-003  [AM-MAX2-003]

Arrowmax AM-MAX2-003 C-Hub +5 Set (7075)
Price:
AUD$47.19
Brand:
Arrowmax
Model:
AM-MAX2-003
Condition:
Brand New
Write a review

Performance C-Hub +5 for Yokomo B-MAX2

The Arrowmax AM-MAX2-003 C-Hub +5 set is a precision 7075 aluminium replacement crafted for the Yokomo B-MAX2 chassis. By increasing the C-hub angle by +5 degrees the kit provides a controllable change to front steering characteristics while leaving suspension mounts unchanged.

Fitting generally replaces the original C-hubs and keeps the factory wheel hub and spindle in use. During assembly confirm steering link and bulkhead clearances and then check camber and toe settings. This item should be treated as a setup option to tune behaviour rather than a strength upgrade.

Begin tuning from your normal baseline, then test the car after installing the +5 hubs to assess differences in turn-in, steering balance and mid-corner behaviour. Pair with measured tyre or damper adjustments to find the best combination for lap time gains.

Specifications

  • Item: C-Hub +5 Set (7075)
  • Material: 7075 aluminium
  • Model Number: AM-MAX2-003
  • Compatibility: Yokomo B-MAX2

Can I reuse my existing wheel hubs with this kit?

Yes, the design expects the stock wheel hub and spindle to be reused. Check that everything seats correctly and that there is no interference with steering components.

Does the aluminium material affect handling feel?

The 7075 aluminium gives precise geometry and firm mount points which can make steering inputs feel more consistent compared to softer materials, helping with repeatable setup changes.

Will I need to adjust ride height after fitting?

Ride height usually stays the same, but since steering behaviour changes slightly you may wish to fine tune ride height as part of a wider setup check to optimise balance.

Is the AM-MAX2-003 suitable for club racing?

Yes, it is a tuning part commonly used in club-level competition to tweak turn-in and mid-corner steering. Test thoroughly to ensure compliance with any class rules on aftermarket parts.

How often should I inspect the hubs?

Inspect mounting points and fastener tightness after initial runs and during routine maintenance; aluminium hubs show wear differently to plastic and should be checked periodically.

Copyright © 2008-2026 rcjaz.com.au All rights reserved