Yokomo C-CQ0605A 1/12 Monster Truck Wheel 2.2 x 2.4 (White) for RC Off-Road  [C-CQ0605A]

Wheel specification — Yokomo C-CQ0605A

The Yokomo C-CQ0605A is supplied as a matched pair and serves as an RC-scale replacement wheel for 1/12 monster truck use. Its white finish and 2.2 x 2.4 sizing align with the wheel footprint seen on a range of 1/12 2WD RTR monster truck kits.

Setup considerations: intended as a swap for worn or standard rims, these wheels will influence tyre selection, ride height and handling response. Confirm hex and hub fit on the host chassis, check that the tyre beads are seated correctly, and perform a roll-out test before final torqueing to prevent binding.

Fitment guidance: remove old wheels using the correct hex driver, verify hub clearance both sides, tighten hardware uniformly, and carry out a brief drive to check for interference with suspension or steering. Fitting a different wheel size can change effective gearing and ground clearance, so re-evaluate drivetrain and body clearance afterward.