Upgrade for DIB: Rear FCD Assembly (2.0 Rear Red) - YOKIBFCD20R Yokomo  [YOKIBFCD20R]

Yokomo IB-FCD20R - FCD Set (x 2.0 Rear Red) for DIB
Price:
AUD$76.65
Brand:
Yokomo
Model:
YOKIBFCD20R
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DIB category
Write a review

DIB Rear FCD Assembly

This Yokomo YOKIBFCD20R FCD set offers a direct-fit rear finishing control assembly tailored for DIB-format RC touring chassis. The parts are supplied as scale replacement components to let builders change rear differential character and balance the chassis during setup.

The product targets tuning at the setup level rather than visual modification, concentrating on rear adjustability: altering FCD settings changes torque split and slip behavior during acceleration and corner exits, giving a straightforward tuning path for improving handling balance without overhauling the drivetrain.

Fitting guidance: parts attach at the rear differential area on DIB chassis where FCD components mount, either replacing or adding to the existing rear FCD hardware. Installation generally involves removing the rear gear cover and using routine hex drivers to secure parts; check clearances and existing screws prior to final tightening.

Specifications

  • Item FCD Set (x 2.0 Rear Red)
  • Model Number YOKIBFCD20R
  • Material Not specified
  • Compatibility DIB

For drivers and mechanics running DIB chassis, this FCD assembly provides a simple means to alter rear differential behavior and fine-tune corner exit characteristics; always confirm fit and interaction with your current setup when adjusting settings.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What steps are recommended when installing this part on DIB?

Remove the rear cover, trial-fit the FCD elements to the diff housing, ensure correct orientation, then tighten hardware incrementally while checking for binding.

Will I need workshop tools beyond basic hex drivers?

No special tools are usually needed; standard hex driver sets, a small spanner set and pliers are generally enough for fitting and checks.

Should I expect to retune suspension after changing FCD settings?

FCD adjustments can shift traction and weight transfer, so minor suspension tweaks may be useful to rebalance the car after changes. Test in small increments.

Does the red 2.0 marking indicate a specific tuning range?

The red finish denotes the 2.0 rear designation; actual tuning effect is determined by the component geometry and settings rather than the color code alone.

Copyright © 2008-2026 rcjaz.com.au All rights reserved