Yokomo MS-001BS Front Chassis Stiffener for MS1.0 BD11 BD12  [MS-001BS]

Yokomo MS-001BS Front body stiffener for MS1.0/BD11/BD12
Price:
AUD$10.64
Brand:
Yokomo
Model:
MS-001BS
GTIN:
639342226658
Condition:
Brand New
Write a review
alt="Yokomo MS-001BS Front body stiffener for MS1.0/BD11/BD12" title="Yokomo MS-001BS Front body stiffener for MS1.0/BD11/BD12"

Stiffen the Front End with Yokomo MS-001BS

The Yokomo MS-001BS Front Body Stiffener is intended to sharpen aerodynamic response for MS1.0, BD11 and BD12 chassis. Paired with a graphite bumper support, it reduces hood flex so the front end keeps a more stable profile under aerodynamic load.

Better Front Traction Under Load

Installing the Yokomo MS-001BS improves how downforce is applied to the front axle, helping the tyres stay engaged during fast sections. With the B12-001BS graphite bumper support the assembly resists deformation and converts aerodynamic force into effective grip.

Designed Fitment and Quick Mounting

Made for the MSR-010 chassis, the MS-001BS suits the MS1.0, BD11 and BD12 model lines. It mounts easily so you can fit the upgrade and return to set up and testing without a lengthy workshop session.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this stiffener change front steering feel?

Yes, the MS-001BS can tighten steering response by reducing body flex, which often results in a firmer, more predictable front end.

Is the B12-001BS required to see benefits?

Using the B12-001BS graphite bumper support is recommended to prevent hood movement and get consistent downforce transfer.

How long does fitting normally take?

For experienced builders a simple install can be completed in a short session; novices should allow time to verify alignment and make small setup adjustments.

Can I fine tune handling after adding the stiffener?

Yes. After fitting, adjust damper settings and front roll characteristics to suit the changed load patterns on the front tyres.

Is any trimming of the body shell required?

In most factory fitments no shell trimming is needed, but always check clearance once the stiffener and bumper support are installed.

Copyright © 2008-2025 rcjaz.com.au All rights reserved