Yokomo PG-6434A 34T Hard Coated Aluminium Pinion Gear DP64  [PG-6434A]

Price:
AUD$11.86
Brand:
Yokomo
Model:
PG-6434A
GTIN:
0639342208128
Condition:
Brand New
Write a review

Yokomo PG-6434A: Built for Consistent Mesh

The Yokomo PG-6434A is a solid option for hobbyists wanting a mix of lightness and durability. This 34-tooth pinion uses a hard-coated aluminium finish to resist wear while keeping mass low for snappy acceleration.

Performance and Pitch Details

Manufactured to a 64 pitch specification, the PG-6434A achieves smooth engagement with correctly matched spurs. Correct mesh helps preserve teeth and transfer power efficiently across the drivetrain.

Suitable Models and Uses

Commonly used on 1/10 scale road and touring cars, the pinion is suitable for tuning gear ratios for track or recreational driving. It is a useful spare for racers who swap ratios frequently.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
The pinion is optimised for on-road conditions. It can handle light off-road use but heavy impacts or excessive grit will speed wear, so inspect regularly after rough sessions.
Check the pinion for burrs and wear after every few runs, especially when using abrasive surfaces or high-power setups. Replace if teeth show flattening or chipping.
Ensure the motor shaft is clean and the set screw is tight. Use a gear marking compound to dial in mesh and recheck after a short run to confirm no movement has occurred.
This pinion is already weight-optimised. Machining or modifying it further is not recommended as it may reduce strength and lead to premature failure.

Copyright © 2008-2025 rcjaz.com.au All rights reserved