Yokomo PG-6447A Hard-Coated 64 Pitch 47T Pinion for On-Road  [PG-6447A]

Price:
AUD$11.86
Brand:
Yokomo
Model:
PG-6447A
GTIN:
0639342208258
Condition:
Brand New
Write a review

Precision 64 Pitch Pinion by Yokomo PG-6447A

The Yokomo PG-6447A pinion is made from hard-coated aluminum to give a durable yet light replacement gear for RC drive systems. Its 64 pitch and 47 tooth count are intended to mesh with spur gears of the same specification for reliable compatibility.

Advantages of Aluminum Gearing

Aluminum pinions reduce rotating mass while maintaining reasonable toughness, which can help sharpen acceleration and throttle response on smooth surfaces. They work well where quick drivetrain reaction is valued.

Installation and Care Notes

  • Confirm the mesh setting to avoid excessive tooth wear.
  • Remove any stones or sand lodged in the teeth after running on rough surfaces.
  • Light lubrication on the gear faces will reduce friction and keep shifting smooth.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the PG-6447A fit my 1/10 touring car?

If your car uses a 64 pitch spur gear and requires a 47 tooth pinion, the PG-6447A will be compatible. Verify pitch and tooth count to be sure.

How do I check for perfect gear mesh?

Use the conventional paper method, tighten the assembly, then test at low speed to confirm there is no binding or excessive backlash.

Is special maintenance required for this pinion?

Routine inspection and light cleaning after dusty runs are usually sufficient; replace the pinion if teeth show clear signs of wear or damage.

Copyright © 2008-2025 rcjaz.com.au All rights reserved