Yokomo S4-008F2GA Graphite Front Suspension Arm for YZ-4SF2 Race Fit  [S4-008F2GA]

Yokomo S4-008F2GA Graphite Front suspension arm(TypeB/2hole/?3.5pin) for YZ-4SF2
Price:
AUD$19.81
Brand:
Yokomo
Model:
S4-008F2GA
GTIN:
0639342209767
Condition:
Brand New
Write a review

Performance Graphite Front Arm for YZ-4SF2

The Yokomo S4-008F2GA Graphite Front Suspension Arm is tailored to the YZ-4SF2 platform and serves as a stronger alternative to stock arms. Manufactured from a graphite-containing resin, the arm increases structural hardness to sharpen response and enhance grip on mixed surfaces. It keeps inner suspension pin holes at Φ3.5mm and outer holes at Φ2.5mm to ensure correct alignment during aggressive driving.

Handling Benefits of Graphite Parts

Graphite blends add stiffness over common resin parts, delivering more immediate steering reaction and improved stability through mid-corner phases. Racers will find better consistency lap after lap due to reduced flex.

Fitment Guide and Replacement Notes

Compatible with chassis codes including B-YZ4SF2-1, MOR-010, and MOR-020, this arm fits using existing mounting points. Hobbyists can perform the changeover quickly at the track without extra adaptors.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Graphite-containing resin improves stiffness and resistance to deformation, but like any part it can crack under severe impact, so inspect after big hits.
The arm uses inner suspension pin holes at Φ3.5mm and outer pin holes at Φ2.5mm, matching typical YZ-4SF2 hardware.
Stiffer front arms can change front grip balance, so you may need to tweak camber or shock settings to maintain even tyre wear.

Copyright © 2008-2025 rcjaz.com.au All rights reserved