Yokomo Steering Bell Crank Set for DP-DRG3G - SD-202A Drift Chassis Repair Kit  [SD-202A]

Yokomo SD-202A Steering Bell Crank
Price:
AUD$8.86
Brand:
Yokomo
Model:
SD-202A
GTIN:
0639342189120
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DRG3G category
Write a review

Replacement bell crank for drifting rigs

The Yokomo SD-202A steering bell crank set is supplied as a replacement parts kit for drift chassis upkeep and repairs. The components address worn steering linkage pieces and arrive as a compact set to help restore correct steering geometry and reduce play in link assemblies.

The pack centers on the bell crank parts together with related link hardware, and includes plastic bearings for pivot interfaces. When replacing items, make sure the bell crank operates smoothly across its motion and check the center link alignment to preserve neutral steering. Do not overtighten fasteners at the bearing locations to avoid binding.

Packing includes

  • Bell Crank A - 1 pcs
  • Bell Crank B - 1 pcs
  • Center link - 1 pcs
  • Center Rink - 1 pcs
  • Plastic bearing 4 x8mm - 4 pcs

Compatible Models

  • DP-DP7C
  • DP-DP8
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-DM13A
  • DP-ZCRA
  • DP-TYS15A
  • DP-BL34DA
  • DP-PS13A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-JZXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • MRTC-SD9
  • MRTC-86
  • DP-DRG3
  • DP-N86R
  • DP-N86W
  • DP-N15R
  • DP-N15W
  • DP-N15S
  • DP-DRG3G
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will fitting new bell crank parts affect steering setup?

Replacing worn bell crank components restores original geometry and can change steering feel; recheck toe and ackermann after fitting to maintain desired handling.

Can I use metal bearings instead of the supplied plastic ones?

The kit includes plastic 4x8mm bearings that match the original design. Upgrading to metal bearings is possible but check clearances and fitment before substituting to avoid interference.

What should I verify after installation?

Confirm the bell crank turns freely, inspect for any binding at bearing seats, and re-center the steering to ensure neutral response during driving.

Copyright © 2008-2026 rcjaz.com.au All rights reserved