Yokomo YOKZCTB29 29mm Titanium Tie Rod Turnbuckles (2pcs)  [YOKZCTB29]

Yokomo ZC-TB29 - Titanium Turnbuckle (29mm) 2pcs
Price:
AUD$15.73
Brand:
Yokomo
Model:
YOKZCTB29
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Tuning and adjustment guide for YOKZCTB29

This Yokomo YOKZCTB29 item is a 29mm titanium turnbuckle sold as a set of 2pcs for RC-scale tie-rod applications. It is an aftermarket, lightweight link intended for fine length adjustment in steering and suspension linkages on model cars. The titanium material offers higher corrosion resistance and reduced mass compared with typical steel replacements, while keeping form factor suitable for standard rod-end fittings.

Use these turnbuckles to fine tune toe, caster alignment, or roll-center nuances by rotating the center sleeve to alter overall length. Install by threading each end into your existing rod ends or ball cups, then make measured adjustments and confirm freedom of movement through the full suspension cycle.

Always verify thread compatibility with your model's rod ends before fitting. The twin pack supplies two links so you can outfit both sides or keep one in reserve for maintenance swaps.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do these affect handling?

Small length changes alter toe and caster symmetry, which can subtly shift turn-in and high-speed stability; make one adjustment at a time and test.

Any setup sequence advice?

Start with baseline measurements, adjust one side slightly, remeasure toe and steering response, then proceed if results are favorable.

Should I lock them after adjusting?

Yes, ensure there is no play at the rod ends and that any jam nuts or thread adhesives used are appropriate for your setup.

Copyright © 2008-2026 rcjaz.com.au All rights reserved