Yokomo YOKZCTB39 39mm Titanium Adjustable Turnbuckles, 2pcs  [YOKZCTB39]

Yokomo ZC-TB39 - Titanium Turnbuckle (39mm) 2pcs
Price:
AUD$15.73
Brand:
Yokomo
Model:
YOKZCTB39
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Adjustable titanium linkages for accurate setup

The Yokomo YOKZCTB39 is a pair of 39mm titanium turnbuckles made for scale RC linkage duties. As precision tie-rods they enable small, repeatable length changes between rod ends and ball cups without fabricating new fixed rods.

Titanium brings corrosion resistance and a weight advantage versus conventional steel turnbuckles, aiding consistent steering and suspension behavior during multiple track runs. Still, inspect joints periodically for wear and secure fitment.

Fitting is performed by threading the turnbuckle into your model's rod ends or ball cups, adjusting to the target length, and securing the assembly using the rod end geometry your setup employs. Because thread pitches and ball cup types vary, check the 39mm overall length against your current parts prior to installation.

Setup tip: employ the adjustable length to dial in toe, steering throw, or anti-squat in measured steps; having two matching pieces allows you to make symmetric adjustments across an axle for side-by-side comparison.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How can these turnbuckles be used to adjust toe?

Change the effective length on each side incrementally and measure toe with your usual method; small, equal adjustments across both sides let you reach the desired toe setting while keeping steering geometry balanced.

Will they thread into most rod ends and ball cups?

They fit where the thread pitch and ball cup style are compatible. Confirm your current rod ends accept the turnbuckle thread before fitting to avoid cross-threading.

Is there a recommended maintenance routine?

Inspect for play or thread damage after heavy use, keep contact surfaces clean, and re-check locking geometry after initial runs to ensure nothing has loosened.

Copyright © 2008-2026 rcjaz.com.au All rights reserved