Yokomo ZC-206LLHA Long Neck Socket Ballstud LL 16.8mm Tuning Item  [ZC-206LLHA]

Yokomo ZC-206LLHA Socket Head Ballstud LL(16.8mm)size
Price:
AUD$10.60
Brand:
Yokomo
Model:
ZC-206LLHA
GTIN:
0639342217397
Condition:
Brand New
Write a review

Raise Upper Arm Mounts with a Longer Ballstud

The Yokomo ZC-206LLHA Socket Head Ballstud provides extra reach for upper arm mounts, helping drivers adjust ride height and clearance. Its extended neck and thread section give added flexibility when modifying suspension stack height.

Tool Fit and Tightening

The ballstud head has a hexagonal hole for a 2mm hex wrench, and the nut is compatible with a 5mm box wrench for tightening and removal. The increased neck length and thread count suit situations where the upper arm needs to sit higher than stock.

Applicable Yokomo Chassis

The Yokomo ZC-206LLHA is compatible with a range of Yokomo chassis, including the B-YZ2CA, B-YZ2DT, B-YZ2DTM, B-YZ4, B-YZ4SF, B-YZ2DTMW, B-YZ2DTM2, B-YZ2CAL2, and B-YZ2DTM2S. This makes it a practical upgrade across several Yokomo platforms.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What are the basic installation steps?

Remove the original ballstud, thread in the ZC-206LLHA, align the arm, and tighten the nut with a 5mm box wrench while holding the head with a 2mm hex if needed.

Can I use this with modified suspension links?

Yes, the longer neck is intended for altered link lengths or raised mounting points, but verify clearance to bulkheads and steering components before final fitment.

Should I re-check after running?

Always re-check nut tightness and thread condition after a few runs, and make small setup changes to observe handling differences incrementally.

Copyright © 2008-2025 rcjaz.com.au All rights reserved