Yokomo ZC-BH265A M2.6x5mm Suspension Pin Tapping Screws  [ZC-BH265A]

Yokomo ZC-BH265A M2.6x5mm Tapping Screws for Sus_arm Pin
Price:
AUD$3.90
Brand:
Yokomo
Model:
ZC-BH265A
GTIN:
0639342217694
Condition:
Brand New
Write a review

Tough Tapping Screws for Suspension Arms

The Yokomo ZC-BH265A M2.6x5mm tapping screws are built to secure the outer suspension pin on the suspension arm of SD/BD series chassis. They keep the arm and pin anchored so your suspension behaves predictably on rough tracks.

Works With Several Yokomo Chassis

These screws suit chassis models including DP-DP7C, DP-DPMS, DP-DPRA, DP-DPRH and SD-RF01, making them useful stock for racers and club drivers who swap parts between cars.

Maintenance and Repair Use

As part of routine upkeep these M2.6x5mm screws are handy to replace lost or worn fasteners and restore firm suspension mounting, helping avoid unwanted play during hard cornering.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How often should I check these screws?

Check them as part of your regular pre-run inspection and after heavy impacts. Tighten if needed to maintain suspension alignment and handling.

Are left and right screws different?

No, these M2.6x5mm tapping screws are symmetric and can be used on either side of the suspension arm where the same thread and length are called for.

Should I use thread lock?

A small amount of medium strength thread lock can help prevent loosening in high vibration or racing use, but avoid over application which makes future servicing harder.

Copyright © 2008-2025 rcjaz.com.au All rights reserved