Yokomo ZC-S550A 5.0x7.0x0.5mm Shim Set (8 Pieces) - Workshop Tuning Pack  [ZC-S550A]

Yokomo ZC-S550A 5.0x7.0x0.5mm shim (8pcs)
Price:
AUD$3.62
Brand:
Yokomo
Model:
ZC-S550A
GTIN:
0639342219070
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $3.91 each $-0.58 or -8%
3+ $3.38 each $0.71 or 7%
Write a review

Workshop Shims for Accurate Spacing

The Yokomo ZC-S550A shim set provides a straightforward way to adjust component spacing during setup sessions. Each set contains eight shims with an outer diameter of 7.0 mm, inner diameter of 5.0 mm, and a consistent thickness of 0.5 mm for reliable measurements.

Refining Alignment and Movement

These shims help remove unwanted clearance and keep moving parts aligned. Fit them where small changes in spacing will reduce binding or unwanted lateral play for smoother operation.

Compatible with Popular Yokomo Chassis

Suitable for multiple Yokomo chassis lines, including B-YZ4SF2-1, MOR-010, and MDR-010 series, these shims are a practical addition for general setup and repairs.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How many shims should I apply in one location?

Use as many as needed to reach the desired clearance, but fit them evenly and test after each change to avoid over-correction.

Do shims affect bearing preload?

Shims can change the spacing around bearings so check preload and endplay after installation to ensure bearings rotate freely.

Should I lubricate shim contact areas?

Keep mating surfaces clean; a light anti-seize or thin oil may help in metal-on-metal locations but avoid excess that attracts dirt.

Copyright © 2008-2026 rcjaz.com.au All rights reserved