Yokomo ZC-S60A Shim Set 6.0 ID 20pcs 0.13/0.25/0.50mm  [ZC-S60A]

Yokomo ZC-S60A 6.0? Spacer 0.13/0.25/0.50 20pcs.each
Price:
AUD$7.80
Brand:
Yokomo
Model:
ZC-S60A
GTIN:
0639342219087
Condition:
Brand New
Write a review

Shim Set for Careful Chassis Tuning

The Yokomo ZC-S60A kit supplies 6.0mm inner diameter spacers in three precise thicknesses: 0.13mm, 0.25mm and 0.50mm, with 20 pieces per thickness. This makes it easy to adjust clearances across different parts of your model.

Practical Uses on Your Model

These spacers work well for trimming suspension geometry, correcting small misalignments and fine tuning bearing or gear mesh where a 6.0mm ID is needed. They help you test small setup changes without overhauling parts.

How to Approach Tuning

Use the thinnest spacers first and increase thickness step by step to reach the desired behaviour. The assortment supports incremental experiments to refine handling characteristics.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use these to tweak suspension geometry?

Yes, they are commonly used to alter spacing on suspension pivots and mounting points where a 6.0mm inner diameter fits.

Do these spacers affect balance or weight much?

Because the shims are very thin they are not a significant source of added mass, making them practical for tuning without upsetting balance.

What tools help when fitting these shims?

Small tweezers, a thin pick and a set of calipers help with handling and verifying stack thickness while fitting spacers in tight locations.

Copyright © 2008-2025 rcjaz.com.au All rights reserved