YZ-2 Series Precision Slipper Conversion - Z2-670C3 by Yokomo  [Z2-670C3]

Yokomo Z2-670C3 Triple Pad Slipper set for YZ-2 series
Price:
AUD$38.50
Brand:
Yokomo
Model:
Z2-670C3
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - ROR-010 category
Write a review
alt="Yokomo Z2-670C3 Triple Pad Slipper set for YZ-2 series" title="Yokomo Z2-670C3 Triple Pad Slipper set for YZ-2 series"

Precision engagement and tuning

This is an RC-scale replacement set that converts the standard two-pad slipper on YZ-2 series chassis to a three-pad configuration. The additional pad smooths engagement and allows finer preload and slip adjustments without changing other drivetrain parts.

The three-pad layout moderates clutch engagement and helps maintain more consistent torque transfer under repeated use. On high-grip surfaces the change reduces abrupt lockup and lowers the tendency for effectiveness to drop when frictional heat accumulates in the slipper assembly.

Installation is a direct swap that uses the existing slipper hub and shaft; compatible YZ-2-series hubs require the same mounting interfaces, so no chassis modification should be necessary. Check pad alignment and clearance during initial setup and re-check after the first run when new pads seat in.

Specifications

  • Item Yokomo Z2-670C3 triple pad slipper set
  • Model Number Z2-670C3
  • Compatibility B-YZ2CA / B-YZ2DT / B-YZ2DTM / B-YZ2DTMW / B-YZ2DTM2 / B-YZ2CAL2 / B-YZ2T / B-YZ2DTM3 / B-YZ2CAL3 / B-YZ2DTM31-1 / B-YZ2CAL31-1 / ROR-010 / ROR-010RTR / ROR-010RTR-1

Compatibility

  • B-YZ2CA
  • B-YZ2DT
  • B-YZ2DTM
  • B-YZ2DTMW
  • B-YZ2DTM2
  • B-YZ2CAL2
  • B-YZ2T
  • B-YZ2DTM3
  • B-YZ2CAL3
  • B-YZ2DTM31-1
  • B-YZ2CAL31-1
  • ROR-010
  • ROR-010RTR
  • ROR-010RTR-1

Ideal when you want finer control over clutch engagement for faster lap-to-lap consistency; pair with your preferred spur and pinion and adjust preload for track conditions.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does the triple pad affect throttle feel and lap times?

The extra pad delivers a gentler engagement curve, which helps drivers modulate throttle more precisely out of corners. This can translate to improved consistency and potentially better lap times depending on setup.

Should I change my gearing after installing this set?

Gearing does not need to change solely because of the pad count; however, the smoother engagement may allow slightly more aggressive gearing if traction improves. Tune gearing based on traction and motor load tests.

Does pad material differ from stock?

This set uses compatible friction material sized for three-pad layouts; characteristics are chosen to balance grip and heat resistance. Expect a bedding-in period before maximum consistency is reached.

Any setup tips for changing track conditions?

On higher grip surfaces reduce preload slightly to avoid lockup; on lower grip increase preload in small steps. Monitor pad temperature and slip during setup runs to refine settings.

Copyright © 2008-2026 rcjaz.com.au All rights reserved